Hi all,
I have a problem with speed dials/VDN's and VAR's
I'm trying to save on Vectors here, so the idea is to point different VDN's to the same Vector but putting the speed dial number on each VDN in V1.
example VDN 8000 - V1 =9001 speed dial number here
When i put a trace on the VDN i can see it dial the number but then it drops it.
11:46:42 0 0 ENTERING TRACE cid 4554
11:46:42 23 1 vdn e8000 bsr appl 0 strategy 1st-found override n
11:46:42 23 1 wait-time
11:46:43 23 2 set
11:46:43 23 2 variable V1= [9001xxxxxxxxxx] vdn var
11:46:43 23 2 operand = [16]
11:46:43 23 2 ========= MOD10 =========
11:46:43 23 2 digits = [#]
11:46:43 23 33 stop
11:46:43 23 33 LEAVING VECTOR PROCESSING cid 4554
11:46:43 23 33 TRACE COMPLETE cid 4554
I tried lots of ways but none seem to dial out ok. COR for the VDN is OK for outside.
8710 v3.1.4
Thanks, Lever
I have a problem with speed dials/VDN's and VAR's
I'm trying to save on Vectors here, so the idea is to point different VDN's to the same Vector but putting the speed dial number on each VDN in V1.
example VDN 8000 - V1 =9001 speed dial number here
When i put a trace on the VDN i can see it dial the number but then it drops it.
11:46:42 0 0 ENTERING TRACE cid 4554
11:46:42 23 1 vdn e8000 bsr appl 0 strategy 1st-found override n
11:46:42 23 1 wait-time
11:46:43 23 2 set
11:46:43 23 2 variable V1= [9001xxxxxxxxxx] vdn var
11:46:43 23 2 operand = [16]
11:46:43 23 2 ========= MOD10 =========
11:46:43 23 2 digits = [#]
11:46:43 23 33 stop
11:46:43 23 33 LEAVING VECTOR PROCESSING cid 4554
11:46:43 23 33 TRACE COMPLETE cid 4554
I tried lots of ways but none seem to dial out ok. COR for the VDN is OK for outside.
8710 v3.1.4
Thanks, Lever