Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using MS Access as database for VB 1
- Thread starter ythg
- Start date
-
1
- #2
Please read FAQ222-2244
Your question is somewhat lacking.
Just what happens when you try to use it?
If it is because of an unrecognized db format, then upgrade to VB6 SP5.
If you are using DAO, then change your references from DAO 3.x to DAO 3.6.
After that, if you are using a DataControl, make sure the Connect property is set to Access 2000.
If you are using ADO, then make sure the provider in the connection string is set to the JET 4.0 provider.
Your question is somewhat lacking.
Just what happens when you try to use it?
If it is because of an unrecognized db format, then upgrade to VB6 SP5.
If you are using DAO, then change your references from DAO 3.x to DAO 3.6.
After that, if you are using a DataControl, make sure the Connect property is set to Access 2000.
If you are using ADO, then make sure the provider in the connection string is set to the JET 4.0 provider.
- Status
