Using 5410 with 3.0DT?

[big70]

Can i use 5410 phones with the latest 3.0DT.

Greets Peter

 

[PrivateBuild]

As far as i know, 3.0DT is DT only. It is basically 2.1.xx with trial licenceing.

 

[tlpeter]

the DS phones won't work on DT port
it just doesn't start up
but you can try to connect an DS expansion module on it
maybe it is going to work (never tryed)
this text files is with 3.0.69


IP Office ADMIN CD V3.0

This CD contains the following applications and software -


Application Version

Installation and Administration Wizard 3.0.24
Manager 5.0.69
Upgrade Wizard 5.0.69
Voicemail Lite 2.1.4
Call Status 4.0.2
System Monitor 5.0.69

IP401 Compact Office 3.0.69
Small Office Edition 3.0.69
IP 403 3.0.69
IP 406 3.0.69
IP 406v2 3.0.69
IP 412 3.0.69
POTS Module 5.0.69
POTSV2 Module 5.0.69
DCP Module 5.0.69
DCPV2 Module 5.0.69
DT Module 5.0.69
S0 Module 5.0.69
NA WAN3 Module 5.0.69
IP WAN3 Module 3.0.69
ATM Module 5.0.69

4610, 4620 Phone Firmware 2.3
4601, 4602 Phone Firmware 1.8.2
5601 Phone Firmware 1.810
5602 Phone Firmware 1.806
5610, 5620 Phone Firmware 2.3
2410, 5410 Phone Firmware 2.00
2420, 5420 Phone Firmware 4.00

CBC 2.1.23
Delta Server 5.0.23

Feature Key Server 1.0.0.5
DECT 2.0.12 and 2.0.18

 

[big70]

I know a 5410 will not work on a dt port

Just want to place a DS Module and some 5410 phone,s.
The other units will be replaced in a couple months just wan,t to add some stations now.

Greets Peter

 

[intrigrant]

Ask your reseller, they must know

 

[big70]

I know that you know so tell me

Greets Peter

 

[intrigrant]

Ok, but next order is for us....

The 54xx series of phones are supported from 3.0GA and above.
So NOT on 3.0DT wich is a face lifted 2.1 version with only the new "try before buy" licenses

 

[big70]

Thanks, if i could dicide i would give you al orders...
But im only one of the working guys.

Greets Peter

 

[disturbedone]

FYI....3.0DT IS (in big capital letters) 2.1.

It was a marketing ploy to make customers think they were getting a new version because Avaya fecked up with 3.0DS so badly that DT phones wouldn't work properly with 3.0DS so they decided to stop supporting DT phones. So they make this "new" version and called it 3.0DT. Notice how conveniently every 3.0DT release would conicidentally appear exactly 2 weeks after every 2.1 release (or the other way around I can't remember)? Look at the Technical Bulletins for the "bug" fixes. In the 3.0DT notes it doesn't actually list them, it tells you to look at the 2.1 Technical Bulletin. Also noticed the version numbers 2.1(44) and 3.0(544), 2.1(51) and 3.0(551) etc etc. It doesn't take a rocket scientist to work the pattern out.

And hence no, the 54xx phones will not work on 3.0DT.

ps I have had this confirmed by Avaya. It's not just me talking s*ite.