Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

URGENT - Production Error

Status
Not open for further replies.

Funkymatt

Programmer
Joined
Aug 27, 2002
Messages
101
Location
US
There is a Dr Watson Error Saying:
"An application error has occurred and an application error log is being generated"
"could not attach to the application Windows NT Error Code=87"

Anyone have ideas?
 
What I found on the MS site:

Cause
This error occurs when an application abnormally terminates itself or is unexpectedly terminated by another application, thus causing an access violation. Windows NT Error Code 87 occurs when Dr. Watson loads to log the error, but the process is shut down before Dr. Watson can access it to gather debug information.

Because Dr. Watson does not attach itself to the application, no debugging information is available in the log file.

This error is not the result of Windows NT closing down the application.

???? Still not sure what caused it to crash...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top