Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Upgrading the firmware on a p550
- Thread starter ranjit
- Start date
hello,
yes, but from the few tests I made it's better from the HMC.
First, in the firmware of the machine (connect vie the ASMI interface), set "Firmware upgrade policy" to "Operating system".
Then in the properties of the physical server (from the HMC interface), specifiy as service partition the on from which you want the upgrade to be done.
You can than use the 'diag' utility or the update_flash command from the command line to updat'e the server's firmware.
Cons :
- once, altough these requirements were ok (on an openpower), the system didn't want to make the upgrade.
- it seems not to be always mandatory, but you better reboot the whole server (and therefore it's partitions).
regards,
yes, but from the few tests I made it's better from the HMC.
First, in the firmware of the machine (connect vie the ASMI interface), set "Firmware upgrade policy" to "Operating system".
Then in the properties of the physical server (from the HMC interface), specifiy as service partition the on from which you want the upgrade to be done.
You can than use the 'diag' utility or the update_flash command from the command line to updat'e the server's firmware.
Cons :
- once, altough these requirements were ok (on an openpower), the system didn't want to make the upgrade.
- it seems not to be always mandatory, but you better reboot the whole server (and therefore it's partitions).
regards,
- Status
Similar threads
- Locked
- Question