UPGRADING LICENSE 1

[rinop]

HI,
I HAVE A BC11/SP12 AND USE WINFIOL OVER ETHERNET
WHO SAY TO PUT THE FILE *.LIC INTO HDU?
I MUST USE V24 ?
THIS IS THE FIRST TIME THAT I UPGRADE THE LICENSES.
THANKS.

 

[rfpui]

To transfer license use any FTP program or Internet Explorer.
If You use FTP program connect to IP NIU address
If IE ftp://xx.xx.xx.xx where xx.xx.xx. is an IP of NIU.

User name and password are this same as You use to connect over Win Fiol.

Then copy License file to directory //USR1/SES/LI


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[rinop]

Thanks,

but Ericsson customer care have told me to also do this way:
Once that the system is loaded it needs to predispose the everything for the loading of the Licenses in the following way:

IOIFC: IODEV=TELNET,PROC=XMODEM;

to create a directory sul'HDU

FIDIIATH = / SYSN/USR1/SES/LIC;

To predispose the system for the transfer of the file 15-1234 ENCs in XMODEM

FICPI:IODEV=SYSTERMINAL,PATH=/SYSN/USR1/SES/LIC/15-1234.ENC;

The system responds " ready for transmission"

To start winfiol X-modem and to transfer the file and at the end of the transfer you/he/she can be read with

FIDAPATH=/SYSN/USR1/SES/LIC/15-1234.ENC;

Subsequently to make to load the licenses from the transferred file:

LIDAIATH=/SYS/USR1/SES/LIC/15-1234.ENC;

to check happens him loading with the command:

LIDAP;

IS THIS COORECT ?

See you soon

 

[rfpui]

Not correct.

You are asked: ….
WHO SAY TO PUT THE FILE *.LIC INTO HDU?
I MUST USE V24 ?
My answer :No, you don't must use v24.

You have connection with MD over Ethernet but parameter PROC=XMODEM is for V24 port valid only
IOIFC: IODEV=TELNET,PROC=XMODEM;

Before creating new directory check existing patch
FIDAP: PATH = / SYSN/USR1/SES/*.* I'm sure that directory LI or LIC exist.

After transfer license to HDU but before LIDAI check and read new license using command
LIDFP ATH= /SYSN/USR1/SES/LI/xxxx.yyy where xxxx.yyy is license file name.



----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[rinop]

That's right,

but with winfiol 5.2 there is a tool in the run's menu to do this, however i didn't know what it existed.
I thought that someone had already used it.
The Ericsson custmer center have told me so but I have not tried to use it yet.
In every case if I will try first as you say you and then as they say and then I know you to say as you has gone,
meanwhile thanks for the precious suggestion and excuse me for my "english".