Upgrade Mfim 100

[nitram11]

Hello,

can someone help with SW, FW,.. update files to a Mfim 100, (i think first to v5.6, then override command procedure, and then to v6.0 or v6,1)- was this correct ?
the Mfim has has the following v:

MFIM GS 95M E-5Gj Dec 11
Boot Version 1.0 Bf May 10
Kernel Version 5.5 Dd
HW issue 2

thanks and regards, Martin

 

[martinhodge]

Upgrading from 5.0 to 5.5 Software
iPECS 5.5 is a major release that effects the internal memory mapping of the system. This
requires the upgrade to be done in stages using a ‘meta file’.
The meta file will re-arrange the internal memory in readiness for the 5.5 system software.
The following files will be required:
System Meta File System Kernel Image System Application
Image
MFIM
50A
GS92ME0Gr_meta_version.rom GS92M55Xx_kernel.rom GS92M55Xx_app.rom
MFIM
50B
GS93ME0Gr_meta_version.rom GS93M55Xx_kernel.rom GS93M55Xx_app.rom
MFIM
100
GS95ME0Gr_meta_version.rom GS95M55Xx_kernel.rom GS95M55Xx_app.rom
MFIM
300
GS96ME0Gr_meta_version.rom GS96M55Xx_kernel.rom GS96M55Xx_app.rom
MFIM
600
GS97ME0Gr_meta_version.rom GS97M55Xx_kernel.rom GS97M55Xx_app.rom
MFIM
1200
GS98ME0Gr_meta_version.rom GS98M55Xx_kernel.rom GS98M55Xx_app.rom
• Set Admin and Maint Passwords in PGM 162 as you will need access to the full
System Management options.
• All steps in this document are carried out under the Maint password
• Please always take a backup of the system before carrying out any work on site
• We would recommend that you have access to your maintenance MFIM
The Upgrade Path
Deleting the exisiting files (1)
Under the System Management tab:
Select File System/File View & Delete
Issue date: 18/06/2013
Bulletin number: TB001
Product: iPECS
Bulletin Number: TB001 2 Version: 1.0
Click the `Select All’ option
Click `Delete’
Uploading the Meta File
Under the S/W Upgrade Tab:
Select File Upload
Browse to the Meta File and select Upload
ONCE THE FILE HAS UPLOADED, RESET THE MFIM
Deleting Existing files (2)
Under the System Management Tab:
Select File system/file View & Delete
Click the `Select All’ option
Click `Delete’
Uploading the new System Kernel Image
Under the S/W Upgrade Tab:
Select File Upload
Browse to the new System Kernel Image file and select Upload
ONCE THE FILE HAS UPLOADED, RESET THE MFIM
Uploading the System application Image
Under the S/W Upgrade Tab:
Select File Upload
Browse to the System Application Image file and select Upload
ONCE THE FILE HAS UPLOADED, RESET THE MFIM

 

[martinhodge]

https://1drv.ms/u/s!Ans_TO5PFOAriB0SnHUJnFe2Lmae

 

[martinhodge]

your find both the upgrade files and the lastest 6.1 files you need

regards

martin.

 

[nitram11]

Hello, martinhodge,

thanks a lot for your help, i will try this soon and give a response to you, if i get it to work.

Regards and a star for you....