Unknwn WAN daughter Card

[limejudo]

Installed an adsl wic my current ios is c2600-ik9o3s3-mz.123-3g.bin. I can't see the atm int in when I do a "sh ver". When I do a sh diag I get Unknwn WAN daughter Card.
WIC Slot 0:
Unknown WAN daughter card
Hardware Revision : 1.0
PCB Serial Number : FOC07311G5K
Part Number : 73-8276-03
Board Revision : A0
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Deviation Number : 1-2342
Product Number : WIC-1ADSL-I-DG
Top Assy. Part Number : 800-21969-01
CLEI Code : IP5IJBECAA
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 00 4F 41 01 00 C1 8B 46 4F 43 30 37 33
0x10: 31 31 47 35 4B 82 49 20 54 03 42 41 30 03 00 81
0x20: 00 00 00 00 04 00 80 00 01 09 26 CB 94 57 49 43
0x30: 2D 31 41 44 53 4C 2D 49 2D 44 47 20 20 20 20 20
0x40: 20 C0 46 03 20 00 55 D1 01 C6 8A 49 50 35 49 4A
0x50: 42 45 43 41 41 FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 1:
BRI U - 2091 WAN daughter card
Hardware revision 4.0 Board revision D0
Serial number 28147266 Part number 800-01834-03
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 09 04 00 01 AD 7E 42 50 07 2A 03 00 00 00 00
0x30: 68 00 37 00 02 05 06 01 FF FF FF FF FF FF FF FF

 

[Jsteve]

What type of 2600 do you have?

 

[limejudo]

I spoke to cisco tac last night and i found out the wic adls -1dg was not compatible with the 2620, it has to be the XM models. Wic 180 adsl is the one I needed. Thanks