Unbelivable - AS2kSP4 - Running job become "on hold"

[Fredje]

Hello,

I'm runnig AS2k SP4 on Windows2k SP2

I submitted a job (simple backup).
The job starts without difficulties.
After a while the job become "On Hold"...
No error were logged both in AS and event viewer.

This is copy of Arcserve.log:
20040301 112755 588 65357 file(s) 6902447 KB written to 01/03/04 11:11 @ 430,045 KB/min
20040301 112757 588 Backup E: to 01/03/04 11:11 sequence 1 session 2
20040301 112758 588 Source Directory: E:
20040301 112758 588 Back up Session 2 on Media 01/03/04 11:11
20040301 114219 588 6386 file(s) 8787525 KB written to 01/03/04 11:11 @ 611,749 KB/min
20040301 114221 588 ** Summary for SERVER1 **
20040301 114221 588 2 Sessions.
20040301 114221 588 3.154 Directories 71.743 Files (15.126,02 MB) Backed Up to Media.
20040301 114221 588 36 Directories/Files Skipped.
20040301 114221 588 15.343,18 MB Written to Media.
20040301 114221 588 Elapsed Time: 30m 24s
20040301 114221 588 Average Throughput: 504,70 MB/min
20040301 114221 588 Note: Connect to \\SERVER2\C$ as MYDOM\Backup.
20040301 114222 588 Source Directory: \\SERVER2\C$
20040301 114222 588 Back up Session 3 on Media 01/03/04 11:11

Any sugestions?

Thanks a lot in advance

Fredje

 

[davidmichel]

As a test run a job to backup something else.
If that works create a new job to backup the same data as this existing job.

 

[Fredje]

The test is ok.

Finally I run the job on the same server but on a different device --> OK

I do not understand what's appening... I submitted yesterday in the evening my GFS job on the "faulty device" and it have run without problem. (Without restarting)

One of the mystreries of Arcserve? :-D

However thanks a lot Davidmichel for your help ;o)

Fredje