mostecryder
IS-IT--Management
I ran into this problem while trying to boot a WS-X6K-S2-MSFC2 sup engine. It's in a 6506 chassis...I was successful in booting it up a couple weeks ago. Now I get this message below. Any idea why it'd go bad like this?
System Power On Diagnostics
DRAM Size ..........................256 MB
Testing DRAM .......................Passed
Verifying Text Segment .............Passed
NVRAM Size .........................512 KB
Level2 Cache .......................Present
Level3 Cache .......................Present
System Power On Diagnostics Complete
Unable to read Board EEPROM.
Hardware failure or incorrect image used.
System Power On Diagnostics
DRAM Size ..........................256 MB
Testing DRAM .......................Passed
Verifying Text Segment .............Passed
NVRAM Size .........................512 KB
Level2 Cache .......................Present
Level3 Cache .......................Present
System Power On Diagnostics Complete
Unable to read Board EEPROM.
Hardware failure or incorrect image used.
