Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UDP Port Max

Status
Not open for further replies.
ladylumps

ladylumps

Programmer
Joined
Apr 24, 2006
Messages
7
Location
US
Does anyone know if you have to change the UDP port Max to 9039 on all network regions when you add a 2602 board? I had changed on the region that I put the media resource into, but I didn't know if I needed to change it on all the other regions as well. [banghead]

jazzyjo
 
Status
Not open for further replies.

Similar threads

Turtlepuke
  • Locked
  • Question Question
One X Agent (Does changing to an AUX code use a specific port?)
Replies
0
Views
441
Turtlepuke
Turtlepuke
hebegb41
  • Question Question
Tying a CM v6 to a Definity G3 via a Cisco 8200 router using CISCO CATALYST 8200L-1N-4T with NIM-2MFT-T1/E1++= (2 PORT MULTIFLEX TRUNK VOICE/CLEAR-CHA
Replies
2
Views
97
hebegb41
hebegb41
Samfiller
  • Locked
  • Question Question
Avaya Definity Platform Port Pin outs
Replies
3
Views
530
AvayaTier3
AvayaTier3
ITHawkDriver
  • Locked
  • Question Question
G450 Services port lit up, but not responding
Replies
4
Views
1K
ITHawkDriver
ITHawkDriver
Tre0307
  • Locked
  • Question Question
How many Port Networks here?
Replies
2
Views
482
dialtonebone
dialtonebone

Part and Inventory Search

Sponsor

Back
Top