UDP Change

[HarryJ]

We currently use 00 to dial the operator. I am one of several PBX's in a network. We can now use 0 in our dial plan but I can't seem to change it (can't get rid of second didgit table ect)....or it keeps pointing me to the UDP to initiate the changes. Is there a simple "how to" out there somewhere on changing the udp. I do not have literature which covers it in enough depth. Thank you in advance

 

[lopes1211]

You need to get rid of everything that uses the dialstring you are trying to modify. i.e. you need to make the attd something other than 0 or 00, then remove the sec digit table. Change 0 from misc to attd in the dialplan and then make the attd 0.

-CL

 

[HarryJ]

The only thing that uses the dialstring is 00. When I remove it and attempt to remove the second didgit table for 0 it says "First Didgits Assigned In UDP". In the Udp I am not sure what to modify.

 

[lopes1211]

After removing the existing 00. Do a "change udp 0". You will either have "local" or some udp 1-3 digit code listed as the type. Clear that field by pressing the space bar and enter it. Then try to remove the second digit table.

-CL

 

[HarryJ]

cleared the udp code but am still getting the same message....First didgits assidned in udp.

 

[clausen]

Do a "list UPD" to see if any more entries are still in UDP for 0.

Thanks
Chris