Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

UCM Issues

Status
Not open for further replies.
Joined
May 9, 2011
Messages
64
Location
US
When I web into UCM I am taken to the local administration page.
Until very recently it was working properly and I would get to the Elements page.

In local admin on the deployment page it reads the Node ID is N/A.
Not sure what happened or how to go about resolving this issue.

Thanks in nadvance.
 
Are you logging in with the FQDN?
 
Sounds like a reboot is in order
 
what is the system setup? co-res/ sa-ha, cppm,cpmgs???

Remember if it doesn't work hit it harder

Scott UK
 
Have you tried it from another computer? Maybe your browser is having a problem.
 
oh yeh & the s'ware rls of the elements???

Remember if it doesn't work hit it harder

Scott UK
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top