UCM Issue 3

[jlk53]

Have a IPO running 8.1.69 with a UCM card running 8.1.98. Been working great for 8 months. Last week people could not leave messages. Auto-Attendant still works and you get to the person's VM and hear the beep but no message recorded.
Tried accessing web-controlbut get this:
Traceback (most recent call last):
File "/opt/webcontrol/web/wsgiserver/__init__.py", line 1174, in communicate
req.respond()
File "/opt/webcontrol/web/wsgiserver/__init__.py", line 544, in respond
self._respond()
File "/opt/webcontrol/web/wsgiserver/__init__.py", line 556, in _respond
response = self.wsgi_app(self.environ, self.start_response)
File "/opt/webcontrol/web/httpserver.py", line 237, in __call__
return self.app(environ, xstart_response)
File "/opt/webcontrol/web/httpserver.py", line 212, in __call__
return self.app(environ, start_response)
File "/opt/webcontrol/web/application.py", line 293, in wsgi
start_resp(status, headers)
File "/opt/webcontrol/web/httpserver.py", line 234, in xstart_response
self.log(status, environ)
File "/opt/webcontrol/web/httpserver.py", line 250, in log
print >> outfile, utils.safestr(msg)
IOError: [Errno 30] Read-only file system
everything.
Has anyone seen this before or any suggestions. I have rebooted, Thanks

 

[Wallysworld]

I just had the same thing happen to me (except with one user)and there were some suggestions made in here and the final resolution...

thread940-1720320

 

[tlpeter]

It could be broken so make a backup while you still can.
Check if this is a UCM with the known problem.
This problem is that the SSD will break down.


BAZINGA!

I'm not insane, my mother had me tested!

 

[AACon]

BACK IT UP if you can!!!! If you reboot it, it will go into a kernel panic and it will be READ ONLY. It has happened on like 5 BRAND NEW "good" UC modules. They are CR*P. I've thrown every single linux command I can muster to re-mount it into RW, but alas, it won't go. Backup if you can, get it replaced, ASAP.

-Austin
ACE: Implement IP Office

 

[jlk53]

Thanks for the great info. I he already re-booted. It did go to read only. Luckily I had been doing weekly backups . I will swap out card and apply backup. Thanks again.