Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Type "WHO" to find out what TTY is connected
- Thread starter lamasu
- Start date
Is Multi-User set to YES in the LD17 CFN (Print in LD22, type OVLY)
These are the other commands - just info
WHO Displays user name, port ID, and overlay loaded for each logged-in terminal, as well as the user.s MON and SPRT commands (see below).
SEND xx Sends a message to logged-in terminal xx. When the system responds with a .SEND MSG:. prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.
SEND ALL Sends a message to all logged-in terminals. When the system responds with a .SEND MSG:. prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.
SEND OFF Prevents messages sent by other terminals from appearing at the user.s terminal.
SEND ON Enables messages sent by other terminals to appear at the user.s terminal.
FORC xx Forces terminal xx to log off (the requesting user must log in with LAPW or a level 2 password).
HALT Stops background and midnight routines during a login session.
HALT OFF Resumes halted background and midnight routines.
MON xx Initiates monitoring for terminal xx (the requesting user must log in with LAPW or a level 2 password). The monitored terminal receives a message at the beginning and end of the monitored period.
MON OFF Turns off the monitor function.
SPRT xx Assigns printer output to port xx.
SPRT OFF Resets printer output assignment.
~
These are the other commands - just info
WHO Displays user name, port ID, and overlay loaded for each logged-in terminal, as well as the user.s MON and SPRT commands (see below).
SEND xx Sends a message to logged-in terminal xx. When the system responds with a .SEND MSG:. prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.
SEND ALL Sends a message to all logged-in terminals. When the system responds with a .SEND MSG:. prompt, enter the message text yy...yy (up to 80 characters). The text of a message is considered private and therefore is not written to any log file.
SEND OFF Prevents messages sent by other terminals from appearing at the user.s terminal.
SEND ON Enables messages sent by other terminals to appear at the user.s terminal.
FORC xx Forces terminal xx to log off (the requesting user must log in with LAPW or a level 2 password).
HALT Stops background and midnight routines during a login session.
HALT OFF Resumes halted background and midnight routines.
MON xx Initiates monitoring for terminal xx (the requesting user must log in with LAPW or a level 2 password). The monitored terminal receives a message at the beginning and end of the monitored period.
MON OFF Turns off the monitor function.
SPRT xx Assigns printer output to port xx.
SPRT OFF Resets printer output assignment.
~
good point. I always log in with a LAPW just so I can use the commands that are not available in pwd1 and 2
~
~
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
