Hello all. I have 2 really weird issues with my 3640 routers. They are acting as access servers with 2 CAS t1's comming in. They are stocked with 2 digital mica modem banks as well. The first problem I have is when I turn the routers on and it finds the T1's.. I used to get this before I upgraded my IOS
%DSX0-5-RBSLINEUP: RBS of controller 0 timeslot 1 is up
bla bla bla
%DSX0-5-RBSLINEUP: RBS of controller 0 timeslot 24 is up
but now it only goes to timeslot 10... even though all the lines pick up. Is this just a cosmetic thing?
My second problem is I always see this error..
"This command has no effect on this line; use modem AT commands instead"
This was supposed to be fixed in a new IOS but I have the newest one and I still see the error.
Thanks for any help!!!
%DSX0-5-RBSLINEUP: RBS of controller 0 timeslot 1 is up
bla bla bla
%DSX0-5-RBSLINEUP: RBS of controller 0 timeslot 24 is up
but now it only goes to timeslot 10... even though all the lines pick up. Is this just a cosmetic thing?
My second problem is I always see this error..
"This command has no effect on this line; use modem AT commands instead"
This was supposed to be fixed in a new IOS but I have the newest one and I still see the error.
Thanks for any help!!!
