Two-way speaker

[themanstan]

Is the MISC 8x24 capable of supporting two-way speaker horn

 

[mcrackin]

What I have done in the past is hook the paging system to the Co lines. You can usually get a valcom unit that supports talk back paging and will do what you want. Richard S. McCranie
CoMatrix Southeast
richm@comatrix.com

 

[rconn]

The page port is one way only. To use a two-way paging system the paging must be connected to a line port on an analog trunk card. Then program an appearance of that line on each set that needs paging access or assign it a line pool by it self and access paging through a pool code.

Rob

 

[curlycord]

Bogen also makes a talk back amplifier (about 15 watts).

http://www.samsungtelephonesystems....SID=TBM6ECKRSN7A9HKKSP6Q2CAE73CC5Q51&PID=1205

http://www.spoctel.com