I have approx 5 machines that will grab 2 DHCP addresses from the server. One is the standard address and the other has the RAS/dial-up icon next to it. We have no dial-up to the network and no RAS servers configured. Any ideas as to why this is? We are running a windows 2000 server as the DHCP server.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
two addresses per machine
- Thread starter teqmod
- Start date
Serbtastic
Vendor
Post an 'ipconfig /all' output from one of the 5 machines for analysis.
- Thread starter
- #3
I think the rras service is running on the client machines and may be grabbibg ips because of this. Unfortunately I needed IP's right away so I just deleted the second IP leases and have not seen it again yet. Once I see the problem again I will goto the machines and check this.
- Status
Similar threads