Is there a setting somewhere in 98se to enable an external audio surce to use a computer's sound card's input ports? The MS sound recorder gets the signal, but not sure how to route the sound card input to it's outputs (and have the sound card play audio that is coming in). Or not sure if it's possible. (TIL'm trying to hook up tv audio to computer sound system.) Thx, hope to hear from someone today to get this project finished.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
TV audio to Sound Card 1
- Thread starter fenix
- Start date
-
1
- #2
webmaster999
IS-IT--Management
Try going into the Sound Properties (the little yellow speaker guy in the system-tray at the bottom right of the screen) and on the Playback settings, click off the mute box under Line-In. With the audio hooked up, you should hear it off the computer speakers.
Matt A+, MCP, MCP+I, MCSE Windows NT 4.0, MCSE Windows 2000 Early Achiever with Security Emphasis
Matt A+, MCP, MCP+I, MCSE Windows NT 4.0, MCSE Windows 2000 Early Achiever with Security Emphasis
- Thread starter
- #3
- Status
