Turning on AXID in CDR output - Rls. 20.19 1

[paidsergrey]

Hi,

Anyone out there who might now the commands for turning on AXID in the CDR output on a Nortel Meridian running Rls. 20.19?

The TYPE CDR_DATA commands returns an sch so there must be another way of doing it?

Thanks.

 

[mluckie1]

Gate openers didn't exist in release 20. In LD 21 PRT
TYPE CDB, CUST 0. You will need to go into ld 15 to chg the CDB. You will need to hit return alot.

 

[paidsergrey]

Thank you mluckie1, but I returned past all the prompts in LD 15 with a CHG on the CDB and I did not encounter AXID. Is the prompt something other than AXID in Rls. 20? Thanks again.

 

[acewarlock]

I think it's options first, than CDR (YES). Its been alot of years since I had to make that change.

 

[Reusser]

LD 15
Req: chg
type: CDR
Cust:0
CDR: yes
<cr> until you see AXID
AXID: yes

 

[paidsergrey]

Thanks everyone, you have all been very helpful.

Cheers.