TTI 3

[SR7758]

When i do a status TTI, this is what I get:
TTI Background Task State: completed - all ports translated
TTI State: off
# of Boards Completed: 0
# of Boards Left to Process: 0
Percent Complete: 100
Elapsed Time since Task Started: 0 :0 :0


How do I turn this on for all digital and analog boards?
Thanks, S.R.

 

[JZon]

You have to change it in the system-parameters features.
Also you have to fill in here the TTI-code.
In the features you fill in the TTI-merge code.

Hope this helps

John

 

[Phoneman2]

You shoud see this under CH SYS FEA

WARNING!SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE
Terminal Translation Initialization (TTI) Enabled? y
TTI State: voice TTI Security Code: 22
Record PSA/TTI Transactions in History Log? y

This will be under CH FEA

Terminal Translation Initialization
Merge Code: *88 Separation Code: *89

Check your own dial plan to see what FAC to use.

To use them once you have them set up.
Pickup the hand set or push speaker to get dial code.

To remove a ext from a phone push your (separation code)FAC and then your Security code then the ext number your removing. If done right you will hear two beeps

To add an ext enter your Merge code then your Security code then the ext number. Two beeps Look!!! New Buttons
Same amount of time!

Thanks All Phoneman2

 

[SR7758]

Great! Thank you both! You've been very helpful! S.R.