Trying to Telnet into G3R using Windows CMD

[admsr]

Im trying to telnet into my switch using my windows command prompt but i cant seem to get the function keys up i.e. cancel, next, previous etc,etc,etc....

Can someone give me a thought on this!

Alex
alex.morales@avon.com

 

[AvayaHelp]

Can you get your hands on ASA or DSA?

Avaya, Octel, AUDIX, CMS and other fun stuff.

"There is always a way, it may not be pretty but there is always a way."

P:-D

 

[admsr]

i have ASA and procomm but i wanna be able to use the windows cMD......I know that I can get the CMD from any windows machine!

any help would be appreciated!

Alex
alex.morales@avon.com

 

[AvayaHelp]

My appologies then, I am at a loss, if I find out I'll post it.

Avaya, Octel, AUDIX, CMS and other fun stuff.

"There is always a way, it may not be pretty but there is always a way."

P:-D

 

[cwjr]

Click on the Faq tab at the top of this page. Go to the bottome of the page that opens, and you'll see a catagory for terminal emulation. In there, you'll see a Faq with the subject something like, "how do I telnet into the switch from a pc?". It'll give you the info you want. Actually Windows Telnet doesn't work too well, but I've used Windows Hyperterminal over dial up lines using these instructions with good success.