Trust quit working & Replicate doesn't work

[AV1611]

I setup a Trust between two networks. "bob.local and tom.lcoal" Tom.local has a Master Domain Controller and a backup domain controller. I promoted the Backup to Master after having setup the Trust. Every worked fine for about 4 months.

Now all of the sudden one network can send to the other but not vice versa. Also the Two Domain Controllers on the same network will not replicate. How can I check and fix this?

Thanks, Mike

 

[ITPangaeaArchitect]

i assume you mean PDCe and replica DCs up there (tryin to get out of the 90s )

make sure dns config is correct

http://tek-tips.com/faqs.cfm?fid=6083

FRS log will tell you your replication problems to a point....

what error do you get if you attempt to force replication via ad sites and services?

if you have access to it, grab the win2003 version of repadmin and run repadmin /showreps > c:\showreps.txt & repadmin /showrepl > c:\showrepl.txt

-Brandon Wilson
MCSE00/03, MCSA:Messaging, MCSA03, A+
almost got a paragraph there