Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trunk Group (PRI) Help Requested

Status
Not open for further replies.

bethseymour

IS-IT--Management
Joined
Oct 8, 2008
Messages
12
Location
US
I'm getting some new trunks installed (PRI). The protocol is standard NI2. How is that reflected when building the DS1 and signaling group?

I keep getting an out of service near end on my trunks.
 
Did you made a new signaling group ?


RTFM.gif



ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
1-a United States, Canada AT&T TR 41449/ 41459 (tested with AT&T network, Canadian network, and MCI network)
Service
1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607
Restart
1-c United States NORTEL DMS-250 BCS36/IEC01 Service
1-d United States Telcordia SR-4287 Service

"a" is commonly referred to as AT&T and "b" is commonly referred to as NI-2 or National ISDN

Code:
lay signaling-group 1
                                SIGNALING GROUP

 Group Number: 1              Group Type: isdn-pri
                    Associated Signaling? n          Max number of NCA TSC: 0
                       Primary D-Channel: 01D2024     Max number of CA TSC: 0
                     Secondary D-Channel:   Trunk Group for NCA TSC:
       Trunk Group for Channel Selection: 5       X-Mobility/Wireless Type: NONE
          Supplementary Service Protocol: b          Network Call Transfer? n

         Trunk Brd      Interface ID          Trunk Brd      Interface ID
          1: 02D15            0

This may get you started.

"A people that values its privileges above its principles soon loses both."
- Dwight D. Eisenhower (1890-1969), Inaugural Address, January 20, 1953

For the best response to a question, read faq690-6594


 
NI2 "Supplementary Service Protocol: b" on trunk-group and on signaling group and on the ds1 form "Protocol Version: b"

B = NI2, and is typically used when your T1 comes out of a 5ESS Central Office
This is the only protocol capable of giving the customer NAME and number Caller ID.

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top