Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Troubles with BFS

Status
Not open for further replies.

CTAKAH

MIS
May 2, 2002
15
KZ
Hi all.
I have a troubles with one TN after assigning BFS monitoring on it.
After I've assigned and then removed BFS key from monitoring set, ovl 11 have crashed and I've lost settings for that(ex-monitoring) TN.
Now I can't print (it loops after BFTN string) or remove monitored TN.

Opt 11C rel 22.46.

please help if you got any solutions.

thanks in advance.
 
Sounds like you may have software corruption. If you can not print the TN but can print the DN. First step is to remove anything you can with the set in trouble. Second, do a back-up in load 43, then reload the switch - If problem still exists, you will need you switch vendor or Nortel to get in and clear the affected TN and or DN.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top