Im trying to install version 12.0 of the cisco ios from my previous version of 11.2 currently on the router. When I tftp to the router I get this error after trying to tftp the new ios: [buffer overflow - 130560/130515 bytes] on the router. When I put in the command: copy tftp, then host, ip address, name of file plus .bin on the end of the file, then hit return then I get exclaimation points that leads to that message buffer overflow. How can I correct this so that I can install the new IOS?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Trouble installing IOS on Cisco 4000. Receiving a Buffer Error
- Thread starter mcr123
- Start date
eurobadger
Technical User
Check the size of the flash on your switch, and confirm the amount of flash/RAM required or recommended for the version of IOS you are going to load.
The cisco website will have the information (
EB
The cisco website will have the information (
EB
- Status
Similar threads
- Locked
- Question