Anyone have a configs to share that would show how to configure two 1601s with wic dsu t1 cards that will connect a t1 point to point between to sites? The t1 is considered to be dumb line and uses b8zs. (This is what the se said when it was installed.
I would like to enable transparent bridging, and use bridge groups but have not seen anything that works yet.
The networks need to be joined together as one. We need to share resources and an internet connection.
I do have a couple 2600 series but would like to get more use from the 1601s.
The 1601s have IOS 11.2.
The 2600s have IOS 12.2.
Any help on this is greatly appreciated...
I would like to enable transparent bridging, and use bridge groups but have not seen anything that works yet.
The networks need to be joined together as one. We need to share resources and an internet connection.
I do have a couple 2600 series but would like to get more use from the 1601s.
The 1601s have IOS 11.2.
The 2600s have IOS 12.2.
Any help on this is greatly appreciated...
