Translate multiple external ports on same IP to same port internally

[sch3j]

Is this possible? What is the best way to do it?

Essentially, I have external IP 1.1.1.1 port 100 and external IP 1.1.1.1 port 200 that I need to BOTH translate internally to 192.192.192.192 port 100.

Trying to configure this, I am getting overlap errors. I must be missing something.

 

[Supergrrover]

What commands are you using to config this?
Multiple statics?


Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[sch3j]

Yes...unfortunately, I am just getting my feet wet with this and am still using the GUI as I try to come up to speed with the CLI. Multiple statics is obviously not going to get it done.

Suggestions?

 

[boymarty24]

The pix will not solve this for you i am afraid.

The internal ip answers only on port 100?

 

[sch3j]

Really? That is unfortunate. Yes, in this case, I am pushing SIP traffic across the PIX, but have traffic coming in on multiple ports of the same IP. I was hoping to be able to combine all of this traffic onto the 5060 port of the internal IP.

There is no way to configure this?

 

[boymarty24]

SIP you say. Let me try some stuff in my lab and i will come back to you!

 

[Supergrrover]

here is a possible way around it - give the server a secondary IP and then you can add a new static.


Brent
Systems Engineer / Consultant
CCNP, CCSP