Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Transit call
- Thread starter 250376
- Start date
Hi,
You need to setup the Traffic Matrix... With TCMAS, then change the routes TRAF with ROCAC. The following example ROU 1 is not allowed to connect with ROU 2.
Note you should print the matrix first to make sure it is not in use. TCMAP:CON=ALL; it should be all zero's except 15 if its not in use.
Print the ROUs (ROCAP:ROU=XX
and keep the first 6 TRAF digits as in the print.
Regards
Isinor
You need to setup the Traffic Matrix... With TCMAS, then change the routes TRAF with ROCAC. The following example ROU 1 is not allowed to connect with ROU 2.
Code:
TCMAS:CON=ALL,A=01,B=01;
TCMAS:CON=ALL,A=02,B=02;
ROCAC:ROU=1,TRAF=XXXXXX01;
ROCAC:ROU=2,TRAF=XXXXXX02;Note you should print the matrix first to make sure it is not in use. TCMAP:CON=ALL; it should be all zero's except 15 if its not in use.
Print the ROUs (ROCAP:ROU=XX
and keep the first 6 TRAF digits as in the print.Regards
Isinor
- Status
Similar threads
- Locked
- Question
- Locked
- Question