Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Traffic Shaping

Status
Not open for further replies.
wpski

wpski

IS-IT--Management
Joined
Aug 2, 2002
Messages
82
Location
US
Hello. I have a frame-relay map-class set up on my DLCI for 128K but when I run the command show traffic-shape it shows that the target rate is 56000 what would be causing this?

Thanks

Will

 
Sort by date Sort by votes
Did you set the "bandwidth xx-kbps" command on your interface??

kind regards,
 
Upvote 0 Downvote
yes I did on both as bandwidth 128
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

quazimotto
  • Locked
  • Question Question
Cisco ASA_5505 VPN to Juniper_SRX210 VPN IS UP_ No Traffic!!!!!!
Replies
0
Views
322
quazimotto
quazimotto
steel_bender
  • Locked
  • Question Question
Allow HTTPS TCP Traffic through ASA5525
Replies
1
Views
381
Mogles49
Mogles49
acabezas2014
  • Locked
  • Question Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
309
acabezas2014
acabezas2014
rejackson
  • Locked
  • Question Question
Traffic shaping - how much memory is required
Replies
0
Views
229
rejackson
rejackson
HardTrickySecurity
  • Locked
  • Question Question
How to allow all outgoing traffic and block all incoming traffic with access list?
Replies
2
Views
348
navypop42
navypop42

Part and Inventory Search

Sponsor

Back
Top