Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Track 0 & 1 of HDD bad
- Thread starter rsinfo
- Start date
If 0 is bad , you'll have problems forever. You can do a lowlevel format that may rewrite what you need , or you could possibly use a utility that rewrites bad tracks, Spinrite from Gibson Research. Assuming that it has been upgraded to handle the larger drives.
You could also use an older DOS to create a small partition at the front that is unused. That would handle track 1. Ed Fair
efair@atlnet.com
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
You could also use an older DOS to create a small partition at the front that is unused. That would handle track 1. Ed Fair
efair@atlnet.com
Any advice I give is my best judgement based on my interpretation of the facts you supply.
Help increase my knowledge by providing some feedback, good or bad, on any advice I have given.
- Status