TPanel problems

[Stretchwickster]

I have a panel (Panel1) into which I have inserted Panel2 and Panel3. Panel2's Align property is set to alTop and Panel3's Align property is set to alBottom. I would expect Panel2 to be occupying the top half of Panel1 and Panel3 to be occupying the bottom half of Panel1. Instead Panel3 seems to display itself on top of Panel2 (both within Panel1). Anyone got any ideas on how to equally split the two within Panel1? Clive

 

[Stretchwickster]

Solved it!....the heights of Panel2 and Panel3 were obscuring each other's display. Clive

 

[TonHu]

I assume you where expecting some sort of 'auto-splitter' ;-)

Grtz,
TonHu

 

[Stretchwickster]

Yep! ;-) Would've been nice! Clive

 

[TonHu]

Then search for dfsSplitter or dfsPack on Torry', (not sure about the exact names) as DelphiFreeStuff.com is quite dead, but it was and is one of the best freeware splitters I've found ;-)

HTH
TonHu