Too Many DSS....

[Mlck]

I have this message in the ERROR pane:

"Too many DSS in use by the system extensions"

what is that mean?

2 DSS expension by phones, 4 1616 phones
The doc said 3 per 1616 phones up to 32.

I dont know if its why some phones in the call center freze two tree time a day.


IPO 6.0 (8)
CCR 1.12.2.78
5 Agents IP Phones: 1616

Thanks

 

[Bas1234]

In total there is a max of 1024 combined buttons supported. So do you have EU24 or other DSS models on the system?

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[telecomtekperson]

Dont forget your button limitations as well..for BLF's

 

[Mlck]

The customer have 2 digital phones with eu24.

So, 2 eu24 on 2 5420 and 10 bf32 on 5 1616.

 

[Bas1234]

Did de EU24 and BM32 got the correct firmware?

Tried to untick "Display All Buttons" on the button programming?

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Bas1234]

Check this;

Ask your BP if there is a private build.


CQ43575

1616 BM32 user keys are not functioning correctly when IPO has been restarted

6.0.8

PL_RELEASE_6.1


1-Not Required

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[Bas1234]

A work around could be, disconnect BM32's restart the IPO connect them read oud the config and then try to programm the buttons. Also there is no PB so you have to wait for 6.1

___________________________________________
It works! Now if only I could remember what I did...

Dain Bramaged
___________________________________________

 

[h382]

My 412 with 120 some users says this also, but I haven't seen/heard of any issues related to it.