TN799 Vintage 24 1

[telcomwork]

Anyone load this? I'm trying to move from 15 with known issues for the following which knocked one of our CLAN boards out from communicating with a Tserver.

"Previously, in very rare instances, a very large amount of uplink traffic to the C-LAN could cause the C-LAN to get into a state where it could not register additional endpoints. This has been corrected. "

 

[mikeydidit]

TN799DP FV24 - Firmware Vintage 24

NOTE!!! There are now TWO different versions of TN799DP; Hardware Vintage 0 through 10 (HV0-10) and Hardware Vintage 13 and higher (HV13+). Each hardware version requires a unique firmware file. For Firmware 24, the two files are tn799dp-h0-f24-sig.bin (for TN799DP HV0-10) and tn799dp-h13-f24-sig.bin (for TN799DP HV13+). These two versions of firmware/hardware provide same features and capabilities.

Vintage 24
Released March 19, 2007

TN799DP for HV0 through HV10

File name - tn799dp-h0-f24-sig.bin
File size - 3558512 bytes
MD5 Sum - 12801c7f2510f3a4a6b5874d60fdaf75

TN799DP for HV13+

File name - tn799dp-h13-f24-sig.bin
File size - 3558512
MD5 Sum - 0968ff7fdc380dc09a88dde7c3c79b66
TN799DP Vintage 24 -

TN799DP Firmware Vintage 24 (FW24) contains the following fixes and
enhancements:

TN799DP FW24 provides support for Communication Manager 4.0 features.

A CLAN board audit was added to check the state of open sockets and close them
if they were no longer being used.

This firmware corrects an issue that blocked the sending of CDR data over a CDR link.

Communications between IPSI/SIPI and CLAN have been made more robust.

FV24 corrects a race condition that could result in LAN communication problems.

Please see the Read Me file for additional information.



Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[telcomwork]

Have you installed it? Any issues?

 

[Mitch672]

I have installed FW24 on at least a dozen TN799DP's, and have had no issues yet. When you do a firmware download now, the "file parts" are now cleaned up, when you do a "list directory board XXYZZ". I have installed FW24 on CM 2.2 and CM 3.1.2 system as well, seems to work just fine.

Mitch

 

[telcomwork]

Thank you I installed and haven't had any issues as well.