TN793B V2 TEST #220 FAILURE

[USRepair]

I have a TN793B v2 that is failing test 220.
I cannot locate any info on test #220 to try to diagnose the problem.
Any insight to this problem would be greatly appreciated.
Thanks

 

[wilsontec]

have you check one or more of extension on the card have setting message lamp is neon .
Remove it will ok

 

[USRepair]

Thank you, I did have the MWL set to neon. I have removed those settings and now when I test the board it aborts test 220 and gives 1018 as an error code. Any ideas?
Thanks again

 

[orypecos]

Because it doesn't need to the neon test anymore it aborts the test. U need a special circuit pack for neon LWC lamps.
Don't worry about the abort.

Da-vi'do

P.S. A message to all,if you want to get the best response to a question, please read FAQ222-2244 first. Also give the type & version of your voice mail & pbx system & preview your post to make sure it is complete & understandable. Be aware that if u don't answer a question, I usually will not continue to help u.

 

[USRepair]

Thanks All
Card seems to function fine now.