TN2464BP Compatibility with CM3.1.4 2

[n25]

I'm searching for the latest firmware for TN2464BP in CM3.1.4 and the only one I've found was for TN2464CP. It was specifically stated there that that firmware cannot be used in TN2464BP. Is the TN2464BP supported in CM3.1.4 and if it is would it be okay not to upgrade its firmware? Would a firmware in a lower CM version work under CM3.1.4?

 

[busster]

Believe the 2464 is an "Offer B" card. Back in the GuestWork days, offer B allowed TN2793 and TN2464 circuit packs. Now days there is a option in RFA which will allow the cards. It is somewhat misleading, but believe the option has something to do with foreign options.

 

[n25]

Thanks! What do you mean by "foreign options"? So will it work under CM3.1.4?

 

[4merAvaya]

The most current firmware for the TN2464BP is FW19 (09/2006).

Kevin

http://support.avaya.com/japple/css...253074&temp.selectedRelease=129430#TN2464_V15

 

[busster]

Bottom line, yes it will work. Specific RFA option has to be checked. Sorry can't remember the option, but remember it has something to do with the card being used out of the US.

 

[n25]

Hmmm, so we may need to modify the RFA option in order for it to work. Thanks!

 

[busster]

That is a true. RFA must be modified for it to be recognized.