Anyone ever come across where the time is 4 hrs ahead of the server? This does not make any sense to me. I have tried setting the time server to the IP address of the VM Pro server and an NIST server. both cases, the time is 4 minutes ahead. In either case im not sure why its not pulling the time from the VM Pro server to begin with when the time server is set to the default 0.0.0.0. This system is at a remote branch and the VM is Centralized. Does it not still grab the time from the VMPro when it is centralized? This is a IP500 running 5.0(8) Probably could use the latest MR but am cautious about doing this over the WAN.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations bkrike on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Time 4 minutes ahead
- Thread starter seryozha
- Start date
- Thread starter
- #2
hmmmm... seems like this could be a system status glitch. That is the time that i was going off of. It looks like system status shows 4 minutes ahead on my local system here also, but when i look at the phone it is correct. Still wondering about the centralized VM question though. Thanks
- Status
Similar threads
- Locked
- Question