Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tie Trunk to CO Trunk Low Volume

Status
Not open for further replies.
samorse

samorse

Vendor
Mar 12, 2007
95
US
I have a Legend connected to a Definity via a Tie Trunk. When a station on the Legend calls a station on the Definity, the volume is fine. When a station on the Legend call a LD number, the call routes through the Definity and out a CO trunk group, and the volume is low.

On the Legend, I have modified the UDP switch identifier to use 49, non-legend over 200 miles. I have alo modified the Tie trunks on the Definity to use Low in the DTT to DCO Loss field. In the CO trunk group, I have the Trunk Gain set to High.

Any ideas on how I can further tweak this?

Thanks
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
Internal Trunk override sac/cf of station
Replies
0
Views
168
milske
M
M
  • Locked
  • Question
Call from internal trunk sac/cf override
Replies
0
Views
162
milske
M
J
  • Locked
  • Question
Trunk Analyzer Delete Data
Replies
1
Views
353
gnesvik
gnesvik
Vivek2005
  • Question
Avaya Session manager Call disconnection from lumen SIP trunk
Replies
0
Views
142
Vivek2005
Vivek2005
glmyers
  • Locked
  • Question
TRUNK GROUP REPORT
Replies
3
Views
687
glmyers
glmyers

Part and Inventory Search

Sponsor

Back
Top