tie trunk betweem S8300 and remote switch call failures

[donbott]

We have a tie trunk between a S8300 and a non-avaya system. Calls dialed manualy are hanging, the switch sends a bunch of dial strings:

09:29:23 Calling party station 8656 cid 0x7cb
09:29:23 Calling Number & Name 8656 XXXXXXXXX
09:29:23 dial 918 routeREFIX|FNPA|ARS
09:29:23 term trunk-group 3 cid 0x7cb
09:29:23 dial 918 routeREFIX|FNPA|ARS
09:29:23 route-pattern 1 preference 1 cid 0x7cb
09:29:23 seize trunk-group 3 member 3 cid 0x7cb
09:29:26 dial 91866 routeREFIX|FNPA|ARS

time data
09:29:26 outpulse done 91866
09:29:28 dial 918666 routeREFIX|FNPA|ARS
09:29:28 outpulse done 918666
09:29:28 dial 918666X routeREFIX|FNPA|ARS
09:29:28 outpulse done 918666X
09:29:29 dial 918666XX routeREFIX|FNPA|ARS
09:29:29 outpulse done 918666XX
09:29:30 dial 918666XXX routeREFIX|FNPA|ARS
09:29:30 outpulse done 918666XXX
09:29:30 dial 918666XXXX routeREFIX|FNPA|ARS
09:29:30 outpulse done 918666XXXX
09:29:30 dial 9186662XXXX routeREFIX|FNPA|ARS

and continues like that and the call fails.
Caller hits redial and the call goes through:

09:29:49 dial 918666XXXXXX routeREFIX|FNPA|ARS
09:29:49 route-pattern 1 preference 1 cid 0x7ce
09:29:49 seize trunk-group 3 member 4 cid 0x7ce
09:29:53 dial 918666XXXXXX routeREFIX|FNPA|ARS
09:29:53 outpulse done 918666XXXXXX
09:30:00 active trunk-group 3 member 4 cid 0x7ce

Any thoughts?

Thanks in advance

DonBott

 

[donbott]

We found the issue, changed ars entries added "xx"'s to match the min/max number keeps the switch from dialing until the whole string is entered

Thanks anyway tek-tips rocks!

DonBott