Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

This Terminal Is Barred

Status
Not open for further replies.

lvNortel

Vendor
Dec 8, 2012
298
US
Ok so this little system I got for a song that I want to train myself on booted right up. It came with several 5410 and 2420 sets. They came up but are saying THIS TERMINAL IS BARRED This system was removed from an office and shipped to me as is.

All the buttons are locked and I can not place a call. How do I UNBARR a set?

Thanks!

"A phone is a phone and not a computer workstation".
 
Same response as in your other thread... the system is not licensed properly. Licenses are matched to the serial number on SD card. If you were to downgrade software to R5 or so, it would likely work without any licenses.
 
Thank you. I understand. How would I be able to get the license, from Avaya or would the original owner have a CD or a SN?

"A phone is a phone and not a computer workstation".
 
Where you do get your Avaya stuff from?
Call them and let then check the serial number.
If you need licenses then order them from them and give them the serial number of the dongle.


BAZINGA!

I'm not insane, my mother had me tested!

 
if you upgraded to a release it is not licensed for then you get that result too and you might have to downgrade again

Joe W.

FHandw, ACSS (SME), ACIS (SME)



Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
 
you can also post the sd card number and we can check if there are any licenses assigned.

Joe W.

FHandw, ACSS (SME), ACIS (SME)



Interrupt the silence only if you improve it by saying something, otherwise be quiet and everybody will be grateful.
 
You will also need to switch to standard IP Office mode. The 24xx and 54xx sets won't work otherwise. If version 8.0 or higher is on the control unit, you will need an Essential Edition license for that.

Dan

Remember, I'm not swearing AT you. I'm swearing WITH you. :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top