Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
thewall value
- Thread starter Midrange
- Start date
Hi Midrange,
Can you recheck the total memory on the system using
either
#bootinfo -r
or
#prtconf
I guess, its less than 2GB on the system.May be for this reason, its not allowing to change the thewall parameter. By the way, by default system allocates of 1/2 of the RAM.
aixnag
IBM Certified Specialist - P-series AIX 5L Administration
IBM Certified Specialist - AIX V4 HACMP
IBM eServer Certified Specialist – p690 Technical Support
IBM Certified Solutions Expert - DB2 UDB V7.1 Database Administration for Unix, Linux, Windows and OS/2
Can you recheck the total memory on the system using
either
#bootinfo -r
or
#prtconf
I guess, its less than 2GB on the system.May be for this reason, its not allowing to change the thewall parameter. By the way, by default system allocates of 1/2 of the RAM.
aixnag
IBM Certified Specialist - P-series AIX 5L Administration
IBM Certified Specialist - AIX V4 HACMP
IBM eServer Certified Specialist – p690 Technical Support
IBM Certified Solutions Expert - DB2 UDB V7.1 Database Administration for Unix, Linux, Windows and OS/2
- Status
Similar threads
