The Server List is not Avail... ASAP HELP! 1

[mattloflin]

First off guys, you rock! you can answer pretty much every question except if it will snow on christmas.

so with that in mind, Server1 is the main server, setup as the host of the browser and everything. The server1 can double click my network and open the network and it shows all 12 computers.

However all the other 12 computers including server2 can't reach it. They all say "The server list is not available, you may not have permission"

Now this all worked friday, All i had to do was rebuild the FRS replication.

More info. FRS works like a charm, I can map drives and they read from that server. I can ping the server by it's ip and by its GUID. I can basically do everything except view the workgroup.

So you know the rush I have to get this running so that the accountants/boss wife & daughter can run quickbooks simultaniously via the quickbooks database manager.

I need to figure this out! Thanks again guys!

 

[lhuegele]

Are these computers and servers members of a domain or just a local workgroup?

 

[GlenJohnson]

First thing I always do is reboot. Chances are they are there, but you just can't see them. I've seen this so many times it's not even funny. Save everything, do a safe shutdown, count to ten and turn it back on. I'm betting they will all be there. Good luck.

Glen A. Johnson
Johnson Computer Consulting

Support our Troops!

 

[mattloflin]

ding ding ding, reboot worked great~! I tried thisbefore you said anything, but you were right... add 1 to the list of reboots cure everything.

 

[GlenJohnson]

Glad it worked out.

Glen A. Johnson
Johnson Computer Consulting

Support our Troops!