dsullinger
MIS
Could someone give me the steps needed to get a terminal session started between my Ultra 60 and a Cisco Router through a console cable (serial cable).
Thanks
Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Terminal Session to Cisco Router through Serial Cable
- Thread starter dsullinger
- Start date
- Status
baud 9600
data bits 8
parity none
stopbits 1
cisco rollover cable with db9 connector or integrated db9 connector. might have to slow down speed if experiencing jarbled characters.
check this site too
data bits 8
parity none
stopbits 1
cisco rollover cable with db9 connector or integrated db9 connector. might have to slow down speed if experiencing jarbled characters.
check this site too
- Thread starter
- #3
dsullinger
MIS
Thanks, but I guess what I really need is what program do I use in Solaris to make the terminal connection? and how?
- Status
Similar threads
- Locked
- Question