Telnet problems on Cisco Rouer!!?!?

[o3rat]

I just configure my 2610, its running DHCP and a NAT fine and i can ping both interfaces[ e1/0 69.47.17.34/20 and e0/0 192.168.1.1/24]. I can use the internet and email services. I can telnet the router from within the network, but not from the outside.

This is my current config:

Current configuration : 1160 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname o3Rat
!
enable secret 5 $1$OtFm$MMEYgaFIGkFmzjIwz/Kgm0
!
ip subnet-zero
!
!
ip dhcp excluded-address 192.168.1.1
ip dhcp excluded-address 192.168.1.2
ip dhcp excluded-address 192.168.1.3
ip dhcp excluded-address 192.168.1.10
!
ip dhcp pool MSHOME
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 64.233.217.2 64.233.217.3
lease 5
!
ip audit notify log
ip audit po max-events 100
!
!
!
interface Ethernet0/0
description Switch to Router connection
ip address 192.168.1.1 255.255.255.0
ip nat inside
half-duplex
!
interface Ethernet1/0
description LAN to WAN connection
ip address 69.47.17.34 255.255.248.0
ip nat outside
half-duplex
!
ip nat inside source list 99 interface Ethernet1/0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 69.47.16.1
ip address 69.47.17.34 255.255.248.0
ip nat outside
half-duplex
!
ip nat inside source list 99 interface Ethernet1/0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 69.47.16.1
no ip http server
!
access-list 99 permit any
!
line con 0
password 7 140F170819102F39
login
line aux 0
line vty 0 4
password 7 010B03074E1F031D
login
!
end


Any suggestions?

 

[IllegalOperation]

What specifically are you trying to telnet to? Ethernet1/0?

Is there anything in front of this router?

 

[CompuGuru]

tt could be something in your line vty config. Try building an access class

line vty 0 4
access-class 12 in
exec-timeout 120 0
length 0
!
Your nat statements may also need to contain the extended param.