Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tektronix Phaser 840 error message 2
- Thread starter skilcom
- Start date
-
1
- #2
-
1
- #3
13,004.43:
TCH_JS_LEFT_SLOW
The left jet stack heater is not heating at all, or is heating
too slowly. Ensure the printer is not located next to an
air-conditioning duct. Check that the printhead-to-drum
gap is not too close (the drum can act as a heatsink).
Inspect the printer wiring. Replace the printhead.
TCH_JS_LEFT_SLOW
The left jet stack heater is not heating at all, or is heating
too slowly. Ensure the printer is not located next to an
air-conditioning duct. Check that the printhead-to-drum
gap is not too close (the drum can act as a heatsink).
Inspect the printer wiring. Replace the printhead.
- Status
Similar threads
- Locked
- Question
