printersonly
MIS
I have a customer that has one of these that only has the power led, jam led, and the left rear fan functioning. One the back side the NIC leds work and the ps and pe led function.
No other activity, I have reseated the board and the power supply boards. the fuses on the power supply check out ok, when testing the voltages, they appear to drop rapidly, maybe its the way I'm testing them, maybe not.
All paper sensors are clear and appear to be functioning correctly, no obvious blockages/obstructions/errors etc.
Any assistance would be appreciated
Thank you.
No other activity, I have reseated the board and the power supply boards. the fuses on the power supply check out ok, when testing the voltages, they appear to drop rapidly, maybe its the way I'm testing them, maybe not.
All paper sensors are clear and appear to be functioning correctly, no obvious blockages/obstructions/errors etc.
Any assistance would be appreciated
Thank you.