TCM 8 with Nortel ATA2

[BResource]

Hi,

I was wondering if anyone has been able to get an ATA2 to work with a TCM8 card?

They used to show up as T7208's on the BCM so I was thinking it could work on a IPO?

We have a customer who wants to move away from the BCM but is worried the analogue extension ports on the IPO wont punch the signal far enough.

 

[rdoubrava]

I have gone 3200 feet using AWG22 shielded cable.
How far do you want to go?

 

[BResource]

Less than 1000ft

 

[amriddle01]

They don't work on IP Office

 

[amriddle01]

These are the specs on the IP Office ports:

Unshielded Twisted-Pair (UTP) - 50nf/Km

AWG22 1200m/3937'
AWG24 1000m/3280'
AWG26 670m/2200'

 

[rdoubrava]

Just use a analog port