Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tapes are not full !
- Thread starter Tolot
- Start date
- Thread starter
- #2
![[bigsmile]](/data/assets/smilies/bigsmile.gif "[bigsmile] [bigsmile]")
I think most people will understand you even though they have to guess from time to time ;-)
If you only updated NW, then i think it is a NW problem. However, NW does not use own device drivers. If you have changed those at the same time, this could also be a problem. Also you could try to disable the new tape drive control mechanism called CDI and switch back to "SCSI commands". There have been seen some problems in the past.
You may try to find out more using the tapeexer utility.
If you only updated NW, then i think it is a NW problem. However, NW does not use own device drivers. If you have changed those at the same time, this could also be a problem. Also you could try to disable the new tape drive control mechanism called CDI and switch back to "SCSI commands". There have been seen some problems in the past.
You may try to find out more using the tapeexer utility.
- Status