Tandem question - easy one

[MefistoAplasta]

Im trying to use the CS1K PSTN route from a BCM. I installed a T1 bewteen the CS1000 and a BCM 50 everything is working fine, Im using the next dial plan:

9 (AC1) + station DN
CS1000: 5XXX
BCM:4XXX

Now, I tried to sending from the BCM the ACOD but didn't work, next I tried using the ACOD number but I realized I have to wait like a second to send the other number, then What I have to try next?

Any help would be appreciated.
Thanks in Advance.

 

[bignose21]

You shouldn't need to dial any thing extra for the extension to extension just route 5 from the BCM to the CS1k and DSC 4 in the CS1k towards the BCM. Then on the BCM can you re insert or not absorb the 9 on the external calls thus going straight into ac1 on the CS1k. The only other thing is check is barring in NET_DATA for DITI Yes.

 

[MefistoAplasta]

Thanks bignose21, I will try