talkback paging on BCM

[countrytime]

It's been awhile since I set up talk back paging. As I remember, the output on the Valcom talkback unit has to be connected to a line port on the KSU. Anyone have a guide or more info on this?

 

[hawks]

As far as I know you are correct. To get 2 way paging you need to use a Trunk port off of the system.

 

[tnphoneman]

Connect a trunk to the Valcom unit. Access the trunk and you are done. Nothing special on the trunk to set up.

 

[countrytime]

Anyone have a diagram of the connections to make this work? This was already installed where I did a BCM install and there was no documentation for it. The Valcom unit has a 25-pair cable connected to a 66 block but all the wires were disconnected.

 

[skully1997]

You can go to Valcom.com and download Docs for that particular unit.

 

[acewarlock]

Lookup the valcom model on Google, it's only 1 pr T/R from the BCM.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.